00:00/00:00
Lecture 18 of 22
Border Gateway Protocol
Course Content
0 / 22 completedSection 1: How Routers Route Packets9 videos
Introducing the Router
2m
Demo - Examining the Default Gateway
4m
Building the Packet
1m
Demo - Examine PC Routing Table
2m
Routing the Packet to the Destination
2m
Routing the Packet to the Router
1m
Demo - Examine the Routing Table
1m
Introducing Static Routing
2m
Demo - Add Static Routes
7m
Section 2: IP Communications on a LAN3 videos
ARP to the Rescue
2m
Demo - Examine the ARP Table
3m
IP Communications on a LAN
6m
Section 3: Dynamic Routing5 videos
Introduction to Dynamic Routing
3m
Dynamic Routing Protocols and Operation
3m
Demo - Observe Dynamic Routing with Traceroute
4m
Choosing the Best Route
4m
Border Gateway Protocol
3mNow Playing
Section 4: Adding Redundancy to the Default Gateway3 videos
Adding Redundancy to the Default Gateway
2m
First Hop Redundancy Protocols
2m
Demo - Examine FHRP Behavior
3m
Section 5: Using NAT to Connect Private Networks to the Internet2 videos
Network Address Translation
2m
Port Address Translation
5m